ReflectionProbe

Inherits: VisualInstance3D < Node3D < Node < Object

Captures its surroundings to create fast, accurate reflections from a given point.

Description

Captures its surroundings as a cubemap, and stores versions of it with increasing levels of blur to simulate different material roughnesses.

The ReflectionProbe is used to create high-quality reflections at a low performance cost (when update_mode is UPDATE_ONCE). ReflectionProbes can be blended together and with the rest of the scene smoothly. ReflectionProbes can also be combined with VoxelGI, SDFGI (Environment.sdfgi_enabled) and screen-space reflections (Environment.ssr_enabled) to get more accurate reflections in specific areas. ReflectionProbes render all objects within their cull_mask, so updating them can be quite expensive. It is best to update them once with the important static objects and then leave them as-is.

Note: Unlike VoxelGI and SDFGI, ReflectionProbes only source their environment from a WorldEnvironment node. If you specify an Environment resource within a Camera3D node, it will be ignored by the ReflectionProbe. This can lead to incorrect lighting within the ReflectionProbe.

Note: Reflection probes are only supported in the Forward+ and Mobile rendering methods, not Compatibility. When using the Mobile rendering method, only 8 reflection probes can be displayed on each mesh resource. Attempting to display more than 8 reflection probes on a single mesh resource will result in reflection probes flickering in and out as the camera moves.

Note: When using the Mobile rendering method, reflection probes will only correctly affect meshes whose visibility AABB intersects with the reflection probe's AABB. If using a shader to deform the mesh in a way that makes it go outside its AABB, GeometryInstance3D.extra_cull_margin must be increased on the mesh. Otherwise, the reflection probe may not be visible on the mesh.

Tutorials

Properties

Color

ambient_color

Color(0, 0, 0, 1)

float

ambient_color_energy

1.0

AmbientMode

ambient_mode

1

bool

box_projection

false

int

cull_mask

1048575

bool

enable_shadows

false

float

intensity

1.0

bool

interior

false

float

max_distance

0.0

float

mesh_lod_threshold

1.0

Vector3

origin_offset

Vector3(0, 0, 0)

Vector3

size

Vector3(20, 20, 20)

UpdateMode

update_mode

0

Enumerations

enum UpdateMode:

UpdateMode UPDATE_ONCE = 0

Update the probe once on the next frame (recommended for most objects). The corresponding radiance map will be generated over the following six frames. This takes more time to update than UPDATE_ALWAYS, but it has a lower performance cost and can result in higher-quality reflections. The ReflectionProbe is updated when its transform changes, but not when nearby geometry changes. You can force a ReflectionProbe update by moving the ReflectionProbe slightly in any direction.

UpdateMode UPDATE_ALWAYS = 1

Update the probe every frame. This provides better results for fast-moving dynamic objects (such as cars). However, it has a significant performance cost. Due to the cost, it's recommended to only use one ReflectionProbe with UPDATE_ALWAYS at most per scene. For all other use cases, use UPDATE_ONCE.

enum AmbientMode:

AmbientMode AMBIENT_DISABLED = 0

Do not apply any ambient lighting inside the ReflectionProbe's box defined by its size.

AmbientMode AMBIENT_ENVIRONMENT = 1

Apply automatically-sourced environment lighting inside the ReflectionProbe's box defined by its size.

AmbientMode AMBIENT_COLOR = 2

Apply custom ambient lighting inside the ReflectionProbe's box defined by its size. See ambient_color and ambient_color_energy.

Property Descriptions

Color ambient_color = Color(0, 0, 0, 1)

  • void set_ambient_color ( Color value )

  • Color get_ambient_color ( )

The custom ambient color to use within the ReflectionProbe's box defined by its size. Only effective if ambient_mode is AMBIENT_COLOR.

float ambient_color_energy = 1.0

  • void set_ambient_color_energy ( float value )

  • float get_ambient_color_energy ( )

The custom ambient color energy to use within the ReflectionProbe's box defined by its size. Only effective if ambient_mode is AMBIENT_COLOR.

AmbientMode ambient_mode = 1

The ambient color to use within the ReflectionProbe's box defined by its size. The ambient color will smoothly blend with other ReflectionProbes and the rest of the scene (outside the ReflectionProbe's box defined by its size).

bool box_projection = false

  • void set_enable_box_projection ( bool value )

  • bool is_box_projection_enabled ( )

If true, enables box projection. This makes reflections look more correct in rectangle-shaped rooms by offsetting the reflection center depending on the camera's location.

Note: To better fit rectangle-shaped rooms that are not aligned to the grid, you can rotate the ReflectionProbe node.

int cull_mask = 1048575

  • void set_cull_mask ( int value )

  • int get_cull_mask ( )

Sets the cull mask which determines what objects are drawn by this probe. Every VisualInstance3D with a layer included in this cull mask will be rendered by the probe. To improve performance, it is best to only include large objects which are likely to take up a lot of space in the reflection.

bool enable_shadows = false

  • void set_enable_shadows ( bool value )

  • bool are_shadows_enabled ( )

If true, computes shadows in the reflection probe. This makes the reflection probe slower to render; you may want to disable this if using the UPDATE_ALWAYS update_mode.

float intensity = 1.0

  • void set_intensity ( float value )

  • float get_intensity ( )

Defines the reflection intensity. Intensity modulates the strength of the reflection.

bool interior = false

  • void set_as_interior ( bool value )

  • bool is_set_as_interior ( )

If true, reflections will ignore sky contribution.

float max_distance = 0.0

  • void set_max_distance ( float value )

  • float get_max_distance ( )

The maximum distance away from the ReflectionProbe an object can be before it is culled. Decrease this to improve performance, especially when using the UPDATE_ALWAYS update_mode.

Note: The maximum reflection distance is always at least equal to the probe's extents. This means that decreasing max_distance will not always cull objects from reflections, especially if the reflection probe's box defined by its size is already large.

float mesh_lod_threshold = 1.0

  • void set_mesh_lod_threshold ( float value )

  • float get_mesh_lod_threshold ( )

The automatic LOD bias to use for meshes rendered within the ReflectionProbe (this is analog to Viewport.mesh_lod_threshold). Higher values will use less detailed versions of meshes that have LOD variations generated. If set to 0.0, automatic LOD is disabled. Increase mesh_lod_threshold to improve performance at the cost of geometry detail, especially when using the UPDATE_ALWAYS update_mode.

Note: mesh_lod_threshold does not affect GeometryInstance3D visibility ranges (also known as "manual" LOD or hierarchical LOD).

Vector3 origin_offset = Vector3(0, 0, 0)

  • void set_origin_offset ( Vector3 value )

  • Vector3 get_origin_offset ( )

Sets the origin offset to be used when this ReflectionProbe is in box_projection mode. This can be set to a non-zero value to ensure a reflection fits a rectangle-shaped room, while reducing the number of objects that "get in the way" of the reflection.

Vector3 size = Vector3(20, 20, 20)

The size of the reflection probe. The larger the size, the more space covered by the probe, which will lower the perceived resolution. It is best to keep the size only as large as you need it.

Note: To better fit areas that are not aligned to the grid, you can rotate the ReflectionProbe node.

UpdateMode update_mode = 0

Sets how frequently the ReflectionProbe is updated. Can be UPDATE_ONCE or UPDATE_ALWAYS.